Riverstone Networks RS 8000 Návod k obsluze Strana 71

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 158
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 70
Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide 2-47
Introduction Hardware Overview
Quad Serial – C and Quad Serial – CE Line Cards
The Quad Serial C and Quad Serial CE line cards each contain two dual-serial WAN ports (two serial ports located
on one high density connector). In addition, the Quad Serial – C line card includes compression, and the Quad
Serial – CE line card includes compression and encryption, for each WAN port. Figure 2-33 shows the front panel of
the Quad Serial – CE WAN line card.
Figure 2-33 Front panel of Quad Serial – CE WAN line card
The following table lists the media specifications for the Quad Serial – C/CE line cards.
Per-port Rx Blinking Green – indicates when the port’s transceiver receives good
packets
Blinking Red – indicates when the port’s transceiver receives corrupt
packets
OFF – no receive activity
Per-port Tx Blinking Green – indicates when the ports transceiver transmits good
packets
OFF - no transmit activity
Per-port Alm Solid Red – when signal alarms are present
Off – when no alarms are present
Table 2-42 Connector specifications for quad serial line card
Port Type Specification
Dual serial
V.35, X.21, EIA530, EIA530A, or RS449
LFH-60 high density connector; see Table 2-44 for pin
assignments
Recommended 3 meters (10 feet) segment length for
standard WAN line card-to-CSU/DSU data port.
Table 2-41 LED description for MPLS POS OC-3c/OC-12c line card
LED Description
1,2
Tx
Rx
Link
Quad Serial - CEG8M-SECAC-04
12
3,4
Tx
Rx
Link
34
Online
Offline
Hot
Swap
Zobrazit stránku 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 157 158

Komentáře k této Příručce

Žádné komentáře