Riverstone Networks WICT1-12 Specifikace stáhnout pdf (Strana 100)

5-8 Riverstone Networks RS 32000 Switch Router Getting Started Guide

Loading Software from the Network Managing Software

Here is an example:

5.3.2 Loading Image Software from a BootP/TFTP Server

The RS 32000 contains a BootP client and can be configured to obtain its image software from a BootP/TFTP server.

Using the BootP client allows the RS 32000 to obtain its software network address from the server using only its MAC

address. This eliminates the need to initially configure the RS’s IP address, subnet mask, and boot source.

To configure the RS 32000 to use its BootP client to obtain its image software, perform the following procedure:

1. Load the RS 32000’s image software on a BootP/TFTP server that can be reached by the RS 32000.

2. Boot the RS 32000 and enter Boot mode by interrupting the normal startup sequence by pressing the

“Esc” key.

3. Use the set command to obtain the RS 32000’s base MAC address (ethaddr).

4. Add one to the base address to obtain the MAC address of the RS 32000’s CPU.

Here is an example:

From the example above, adding one to the base MAC address equals

00:00:1d:12:34:57, which is the address

of the RS 32000’s CPU.

5. Use the set command to change the value of autoboot to bootp.

rs-boot> boot

Rebooting. . .

. . .source: tftp://134.152.176.5/tftpboot/ros80

Build location: host 'matrix' by 'adm'...

Version: 8.0.0.0 . . .

re-boot> set

...tty1 = 9600

bootdiagmode = off [off on quick mfg-test]

diag_log =

mfg_loop_by = time [time count]

mfg_loop_max = 86400

bootdelay = 2

promsetaddrs = 1

flow_control = on [off on]

bootptimeout = 5

netaddr = 0.0.0.0

autoboot = boot

netmask = 0,0,0,0

gateway = 0.0.0.0

bootsource = /pc-flash/boot/ros80

bootaddr = 0.0.0.0

ethaddr = 00:00:1d:12:34:56

< base MAC address >

(ethaddr is base MAC addr, add one for actual CPU MAC address)

sysid = -1

rs-boot>

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 110 111

Komentáře k této Příručce

Žádné komentáře

Riverstone Networks WICT1-12 Specifikace Strana 100

Komentáře k této Příručce

Související produkty a manuály pro Sítě Riverstone Networks WICT1-12